ICOM IC-V3500 – 144 MHz FM – 65 W – Nerfd.net

ICOM IC-V3500

65 W Powerful RF Output Power

The Icom IC-V3500 is a rugged 2 m mobile transceiver providing powerful 65 W* of output power. Its large heatsink maintains stable output even during continuous transmission.
* Output power differs depending on version and specific regulatory requirements.

Modern White Display and Simple Operation

While the Icom IC-V3500 retains a simple user interface despite additional function updates for an easy to use radio. The white LCD backlight offers a better readability suitable for mobile operation. The bottom of the display indicates the available functions of the front panel buttons directly below the display.

4.5 W Loud and Clear Audio Output

The Icom IC-V3500 provides class-leading 4.5 W loud audio from the built-in speaker. By improving the frequency response of the speaker and increasing opening slit, the voice is clearly audible and easy to hear.

Instant Volume Loud and Mute Functions

You can temporarily change the volume to a preset level with a simple operation. It can be used as a One-touch mute function by preset volume to zero.

Emergency Call and Alert Functions

In the case of an emergency, the emergency call function alternatively sends an emergency beep and hot microphone audio to let the receiver to know that an emergency has occurred. At the same time, an emergency alarm sounds from the IC-V3500 speaker to notify the people around you of your existence and situation.

Countermeasures against Counterfeit Products

The “3D GENUINE Icom label” and “QR Code Genuineness Determi-nation System” are attached for proof of authentication.
Check the Icom website for details

And More…

A total of 207 memory channels with 6 character channel name
Dynamic bank link scan function scans all memory channels in the selected banks
Built-in CTCSS and DTCS encoder/decoder
Up to 16 DTMF autodial memory channels
Tough construction to pass the MIL-STD 810 G specifications
Weather channel receive and weather alert function (USA version only)
Free download PC programming software, CS-V3500
(https://www.icomjapan.com/support/firmware_driver/)
Auto repeater function (USA version only)
Priority watch function
Wide/narrow channel setting
Power supply voltage display
Most of functions are programmable from remote-control microphone

Frequency coverage	USA version	Transmit	144–148 MHz
Receive	136–174 MHz*
TPE Version, KOR Version	Transmit/Receive	144–146 MHz
THA Version	Transmit/Receive	144–147 MHz
Number of memory channels	207 channels (including 1 call and 6 scan edges)
Type of emission	F2D, F3E (FM)
Frequency stability	±3 ppm
Power supply requirement	13.8 V DC ±15%
Current drain (approximate)	Tx 65 W	11 A
Rx Max. audio/Stand-by	1.5 A/0.4 A
Antenna impedance	50 Ω (SO-239)
Operating temperature range	–10°C to +60°C; 14°F to +140°F
Dimensions (W × H × D; Projections not included)	140 × 40 × 118 mm; 5.5 × 1.6 × 4.6 in
Weight (approximate)	1.1 kg; 2.4 lb

* Guaranteed range TX/RX: 144–148 MHz.

Transmitter

Output power (13.8 V DC)	USA version	65 W, 25 W, 10 W, 5 W
TPE version	24 W, 10 W, 5 W
KOR version	50 W, 25 W, 10 W, 5 W
THA version	60 W, 25 W, 10 W, 5 W
Max. frequency deviation	±5.0 kHz/±2.5 kHz (W/N)
Spurious emissions	Less than –60 dBc
Microphone impedance	600 Ω (8-pin modular)

Receiver

Sensitivity (at 12 dB SINAD)	Less than 0.18 μV
Selectivity	Wide	More than 6 kHz (at 6 dB) Less than 14 kHz (at 60 dB)
Narrow	More than 3 kHz (at 6 dB) Less than 9 kHz (at 55 dB)
Spurious response	More than 60 dB
Audio output power	4.5 W typ. (10% dist., 4 Ω load)
Ext. speaker connector	2-conductor 3.5 (d) mm (1/8ʺ)/4 Ω

All stated specifications are subject to change without notice or obligation.

Applicable U.S. Military Specifications

Standard	MIL-810 G
Method	Procedure
Low Pressure	500.5	I, II
High Temperature	501.5	I, II
Low Temperature	502.5	I, II
Temperature Shock	503.5	I-C
Solar Radiation	505.5	I
Vibration	514.6	I
Shock	516.6	I, IV