Nerfd.net – RF News & Info

Introduction for Icom AH-705 Automatic Antenna Tuner

JH1CBX Masaco introduces AH-705 designed for IC-705.

Descriptions

・Covers the 1.8 MHz to 50 MHz bands

30 m, 98.4 ft or longer antenna: 1.8 – 54 MHz, 7 m, 23 ft or longer antenna: 3.5 – 54 MHz
* Depending on operating conditions or environments, the tuner may not be able to tune the antenna.

・SO-239 antenna connector for 50 Ω antenna such as dipole or Yagi

・“Terminal connector”, binding post socket adapter supplied for a long wire antenna

・2-way power sources using alkaline batteries or external 13.8 V DC*

* 13.8 V DC should be taken directly from an external power supply, not through the IC-705.

・IP54 dust-protection and water resistance construction*

* The connectors should be covered with an adhesive tape or a jack cover to prevent water seeping into the connection.

・Full automatic tuning, just push the [TUNER] button on the IC-705

・Latching relays used for saving power consumption

・190 × 105 × 40 mm; 7.5 × 4.1 × 1.6 in, 450 g; 15.8 oz* compact design


Antenna


Review



Equipment

The ACOM 3x2000A

  The ACOM 3x2000A The ACOM 3x2000A is a HF power splitter / combiner which is a passive device designed to sum the outputs of three HF linear am… Read more


News

The post Introduction for Icom AH-705 Automatic Antenna Tuner appeared first on QRZ NOW – Ham Radio News.

Exit mobile version